test-stands-for-smd-packages-and-adhesive-films.png
max. capacity 5 N, 20 N oder 50 N

Test stand for measuring peeling force of SMD-packages, emboss tapes, adhesive films, stickers, protecion foils, first-aid tapes etc. with high sampling rate based on different standards:

IPTS-5N : IEC 60286-3:2013 und JIS C0806-3:2014

IPTS-20N/-50N : ISO 29862:2007, JIS Z027:2009, ISO 8510-2:1990 und JIS K6854-2:1999

Desktop-device with integrated load cell and digital output signal for data processing with a PC

Special Features

 
2 operation modes:
real time – display the actual peeling strengh
peak force – to measure the peak force during a test
 
High sampling rate of 2000 times/sec
 
Easy to read OLED display
 
Infinitely adjustable peeling angle 165 – 180 Grad
 
5 adjustable travel speeds: 120, 200, 300, 500, 1000 und 1500 mm/min
 
Test stand IPTS has an adjustable setting screw to define stroke
 
Well mounted carriage: Low  mechanical vibration during measurements (0.1 % FS under condition of no attachment and load)
 
Programmable high/low set-points for go/no-go testing:
with color-coded LED display: underrun (-NG) – good (OK) – exceeding (+NG)
 
USB output signal for fast data transfer to a PC (2000 values/sec.)
 
Special software Force Recorder Standard for recording load curve and readings

Standard Features

 
User switchable units: N, gf,  and ozf
 
Display udpdate time 10 times/sec
 
Exact measuring with an accuracy of 0.2 %
 
»Zero Set« to zero the gauge (weight compensation for clamp)
 
Overload stop function (150 % full scale) to decrease the damage of the sensor
 
Immediately aborting the measurement by emergency switch
 
Mains operation

Available Models

Model Capacity
in N
Resolution Capacity
in gf; kgf
Capacity
in ozf; lbf
Standards
IPTS-5N 0 – 5 N 0.001 N 0 – 500.0 gf 0 – 18.00 ozf IEC 60286-3:2013 and JIS C0806-3:2014
IPTS-20N 0 – 20 N 0.01 N 0 – 2.000 kgf 0 – 4.409 lbf ISO 29862:2007, JIS Z027:2009, ISO 8510-2:1990 and JIS K6854-2:1999
IPTS-50N 0 – 50 N 0.01 N 0 – 5.000 kgf 0 – 11.02 lbf ISO 29862:2007, JIS Z027:2009, ISO 8510-2:1990 and JIS K6854-2:1999