cam-bien-do-luc-cang-mazd-100-mbzd-200-mazd-1000.png
Tension Sensor MAZD and MBZD
  • 4 Tension ranges available:
    from 0 - 100 cN
    up to 0 - 1000 cN
  • Application:
    Tensions of threads, fibres and thin wires
  • Field of use:
    For fibres up to 1000 tex ad wires up to approx. Ø 0.3 mm
  • Feature:
    - Small, compact design
    - Guide roller groove Ø 12 mm
    - 2 Different material processe
4 Tension ranges available from 0 - 100 cN up to 0 - 1000 cN

Online tension sensor for measuring small tensions of threads and fibres up to 1000 tex, as well as thin wires up to 0.3 mm Ø

Compact sensor with two different designs for continuous tension measuring in wire and textile industry

Tension meter can be fixed on a mounting rail DIN EN 60715

Special Features MAZD

Tension sensor MAZD with integrated measuring amplifier and high accuracy of 2 % FS
 
gently material path, it is guide over the rollers
 
Material incoming / outgoing angle 35° min
 
Various output signals
– analog: 0 – 1 V DC (standard), 0 – 10 V DC (optional)
– analog DMS: mV/V (optional)
 
Universal mounting possibility – easy to install, even afterwards, on existing machines:
The sensor can be mounted using the three threads at the underside of the housing body. Alternativ it can be fixed on a optional rail DIN EN 60715. A mounting adapter is necessary.
Easy calibration to customized material by operator – zero and gain calibration is required
 
Measuring principle – loadcell with high quality strain gauge bridge
Standard Features
Supplied with a 2 m shield cable with open Ends (other cable length on request)
 
Tension sensor with aluminium housing
 
Certificate of Compliance with the order 2.1 according EN 10204 is included
 
Optionally available: Inspection Certificate 3.1 according EN 10204 with calibration report
Special Features MBZD
Tension sensor MBZD with integrated measuring amplifier and high accuracy of 2 % FS
 
Typical material path – warping the 3 rollers
 
Various output signals
– analog: 0 – 1 V DC (standard), 0 – 10 V DC (optional)
– analog DMS: mV/V (optional)
 
Universal mounting possibility – easy to install, even afterwards, on existing machines:
The sensor can be mounted using the three threads at the underside of the housing body. Alternativ it can be fixed on a optional rail DIN EN 60715. A mounting adapter is necessary.
Easy calibration to customized material by operator – zero and gain calibration is required
 
Measuring principle – loadcell with high quality strain gauge bridge
 

Available Models

Model Model Tension Range Measuring Head Width* Schmidt Calibration Material**
MAZD-100 MBZD-100 0 – 100 cN 70 mm PA: 0.20 mm Ø
MAZD-200 MBZD-200 0 – 200 cN 70 mm PA: 0.20 mm Ø
MAZD-500 MBZD-500 0 – 500 cN 70 mm PA: 0.20 mm Ø
MAZD-1000 MBZD-1000 0 – 1000 cN 70 mm PA: 0.30 mm Ø
Other measuring units available, such as g.
* Outer dimensions of the housing
** Suitable for 95 % of applications PA = Polyamide Monofilament