- 3 Tension ranges available:
from 400 - 5000 cN
up to 5 - 20 daN
basically in the wire industry
- with hooks instead of guide rollers
- for hard to reach and limited access space
3 Tension ranges available from 400 - 5000 cN up to 5 - 20 daN
Special mechanical tension meter for applications where access space is limited or where filaments lie close together.
This hand-held unit is used for control measurements of pretensioned non running ropes and/or polyamide guitar strings.
Tension meter with hooks instead of guide rollers.
Tension meter DXH for use in closed force systems
Minimized bending of material
Roller shifting mechanism ensure easy acquisition of the material
Special finger support located on the rear side reduces the effort to move the outer hooks
Custom-built configurations and special calibration are available
Each instrument is individually calibrated for highest accuracy
Tension meter with rugged aluminium housing
Certificate of Compliance with the order 2.1 according EN 10204 is included
Optionally available: Inspection Certificate 3.1 according EN 10204 with calibration report
||Measuring Head Width
||SCHMIDT Calibration Material*
||400 – 5000 cN
||PA: 0.8 mm Ø
||2.5 – 10 daN
||PA: 1.0 mm Ø
||5 – 20 daN
||PA: 1.5 mm Ø
Other tension ranges available on request.
Other units of measure available, such as g or kg.
* Suitable for 95 % of applications – PA = Polyamide Monofilament