Đồng Hồ Đo Lực Căng DX2-4000-EDM, DX2-3000-EDM, DX2-2000-EDM
Xuất sứ: Germany
Nhà cung cấp: HansSchmidt-Song Thanh Cong
Hãng sản xuất: Hans-Schmidt
0915159944
Tension Meter DX2-EDM
- 3 Tension ranges available:
from 50 - 2000 cN
up to 200 - 4000 cN - Application:
for wire EDM - V-grooved guide rollers groove Ø 12 mm
The analog display of tension meter DX2-EDM enables an optimal process adjustment
Easy to operate
Roller shifting mechanism ensure easy acquisition of the running material
Hand-held unit with built-in mounting holes permit fixed installation for continuous tension measurement
Special finger support located on the rear side reduces the effort to move the outer roller assembly
Standard Features
Everything in operator’s view:
– the guide rollers
– the measured material
– the readings
– the guide rollers
– the measured material
– the readings
Ball-bearing mounted, V-grooved guide rollers
Each instrument is individually calibrated for highest accuracy
41 mm Ø scale
Tension meter with rugged aluminium housing
Certificate of Compliance with the order 2.1 according EN 10204 is included
Optionally available: Inspection Certificate 3.1 according EN 10204 with calibration report
| Model | Measuring Range | Measuring Head Width* | SCHMIDT Calibration Material ** |
| DX2-2000-EDM | 50 – 2000 cN | 91 mm | PA: 0.30 mm Ø |
| DX2-3000-EDM | 100 – 3000 cN | 91 mm | PA: 0.30 mm Ø |
| DX2-4000-EDM | 200 – 4000 cN | 116 mm | PA: 0.40 mm Ø |
Other tension ranges and measuring head widths available on request.
Other units of measure available, such as g.
* Depending on model, either width of wire guide or outer distance between outside guide rollers
** Suitable for 95 % of applications – PA = Polyamide Monofilament
Other units of measure available, such as g.
* Depending on model, either width of wire guide or outer distance between outside guide rollers
** Suitable for 95 % of applications – PA = Polyamide Monofilament
