cam-bien-do-luc-cang-6.png
8 Tension ranges available from 0 - 100 cN up to 0 - 20 daN

Stationary electronic tension sensor for measuring low tensions of textile ribbons, films, foils, fibre bunches etc.

Cylindrical tape rollers with up to max. 30 mm width, one-sided mounting

Tension sensor for quick and easy mounting

Special Features

Tension sensor TSB1 with integrated measuring amplifier and high accuracy of 1 % FS
 
Various roller widths from 7 mm up to 30 mm, according to the application are available. The roller width must correspond with the width of the material to be measured
 
Various output signal are available:
– analog: 0 – 1 V DC (standard), 0 – 10 V DC (optional)
– digital: RS 232 (optional)
– current: 4 – 20 mA (optional)
– analog DMS: mV/V (optional)
 
Easy installation, even afterwards, on existing machines
 
Easy calibration to customized material by operator – zero and gain calibration is required
 
Measuring principle – load cell with high quality strain gauge bridge
 
Tension sensor with mechanical overload protection

Note: a wide range of custom designed models as well modifications are available on request. Please contact us with your demand!

Standard Features

Tape rollers, ball-bearing mounted
 
Tension sensor TSB1 with rugged aluminium housing
 
Required power supply +15…24 V DC (regulated)
 
Certificate of Compliance with the order 2.1 according EN 10204 is included
 
Optionally available: Inspection Certificate 3.1 according EN 10204 with calibration report

Available Models

Model Tension Range* Measuring Head Width** Roller Width
TSB1-100 0 – 100 cN 60 mm 7, 10, 15, 20 mm
TSB1-200 0 – 200 cN 60 mm 7, 10, 15, 20 mm
TSB1-500 0 – 500 cN 60 mm 7, 10, 15, 20 mm
TSB1-1000 0 – 1000 cN 60 mm 7, 10, 15, 20, 30 mm
TSB1-2000 0 – 2000 cN 120 mm 7, 10, 15, 20, 30 mm
TSB1-5000 0 – 5000 cN 120 mm 7, 10, 15, 20, 30 mm
TSB1-10K 0 – 10 daN 120 mm 7, 10, 15, 20 mm
TSB1-20K 0 – 20 daN 220 mm 7, 10, 15, 20 mm
Other tension ranges available on request.
Other measuring units available, such as g or kg
* SCHMIDT calibration material depending on tension range and roller width
** Outside dimensions of front plate

Important for your order:
Please specify model and roller width. Small dual-flanged outer guide rollers are standard. All 3 rollers can be equipped with one flange, if the material to be measured is wider than the rollers. Please request when you order.