cam-bien-do-luc-cang-fsh-1000-fsh-2000-fsh-5000.png
Tension Sensor FSH
  • 6 Tension ranges available:
    from 0 - 1000 cN
    up to 0 - 50 daN
  • Application:
    Wire, cable, rope manufacturing
  • Field of use:
    - Flexible materials as wires, thin ropes, cables, light wave cables, buffer tubes up to max. Ø 10 mm
    - Flat material up to max. 10 mm width
  • Feature:
    Large, hardened guide rollers (groove Ø 29.5 mm) for minimized material deflection
6 Tension ranges available from 0 - 1000 cN up to 0 - 50.00 daN

Stationary electronic tension sensor for flexible material as wires, thin ropes and cables up to 10 mm Ø, as well as linear, flat material up to 10 mm width

Large, hardened guide rollers for minimized material deflection with 29.5 mm groove Ø

Low cost tension sensor for quick and easy mounting

Special Features

Tension sensor FSH with integrated measuring amplifier and high accuracy of 1.5 % FS
 
Ball-bearing mounted guide rollers 29.5 mm groove Ø,
– V-grooved (for material with max. 5 mm Ø)
– U-grooved (for material with 3 up to 5 mm Ø)
– tape grooved (for material with max. width of 10 mm)
 
Various output signals are available:
– analog: 0 – 1 V DC (standard), 0 – 10 V DC (optional)
– digital (optional): USB, WiFi, RS 422 – siehe model FSH-422
– current: 4 – 20 mA (optional)
 
Easy installation, even afterwards, on existing machines
 
2 Mounting possibilities: housing mounting or cylindrical hole mounting (mounting cut out 38.5 – 40 mm Ø) – see picture above.
The housing of sensors with digital output are larger and need as mounting cut a longhole R 19 with a length of 54 mm
 
Easy calibration to customized material by operator – zero and gain calibration is required
 
Measuring principle – loadcell with high quality strain gauge bridge
 
Tension sensor with mechanical overload protection

Note: a wide range of custom designed models as well modifications are available on request. Please contact us with your demand!

Standard Features

Tension sensor FSH with aluminium housing
 
Required power supply +15…24 V DC (regulated)
 
Certificate of Compliance with the order 2.1 according EN 10204 is included
 
Optionally available: Inspection Certificate 3.1 according EN 10204 with calibration report

Available Models

Model Tension Range Measuring Head Width* SCHMIDT Calibration Material**
FSH-1000 0 – 1000 cN 150 mm PA: 0.30 mm Ø
FSH-2000 0 – 2000 cN 150 mm PA: 0.50 mm Ø
FSH-5000 0 – 5000 cN 200 mm PA: 0.80 mm Ø
FSH-10K 0 – 10 daN 200 mm PA: 1.00 mm Ø
FSH-20K 0 – 20 daN 250 mm PA: 1.50 mm Ø
FSH-50K 0 – 50 daN 250 mm steel rope 1.50 mm Ø (7x7x0.20)
Other tension ranges and measuring head widths available on request.
Other measuring units available, such as g or kg.
* Outer distance between outside guide rollers or outside dimensions of front plate
** Suitable for 95 % of applications PA = Polyamide Monofilament