dong-ho-do-luc-cang-dxp-50-dxp-120-dxp-200.png
Tension Meter DXP
  • 3 Tension ranges available:
    from 10 - 50 cN
    up to 20 - 200 cN
  • Application:
    only for textile applications
  • Measuring head as small as possible
  • With non-rotating ceramic pins for high line speeds up to max. 6000 m/min
3 Tension ranges available  from 10 - 50 cN up to 20 - 200 cN

Hand-held mechanical tension meter with measuring head as small as possible for limited access space. Only for textile applications!

With non-rotating ceramic pins for high line speeds up to max. 6000 m/min

Material slip is avoided by small flanges on each side of the pin

 Standard Features

The analog display of tension meter DXP shows changing and fluctuating tensions fast and enables an optimal process adjustment
 
Non-rotating ceramic pins permit line speeds up to max. 6000 m/min
 
The ceramic pins have on each side small flanges to guide the thread and to avoid slipping off the ceramic pins
 
Roller shifting mechanism ensure easy acquisition of the running material
 
Built-in mounting holes permit fixed installation for continuous tension measurement
 
Turned-up outer finger edges guide the running filament into the roller grooves
 
Special finger support located on the rear side reduces the effort to move the outer roller assembly

Standard Features

Everything in operator’s view:
– the guide rollers
– the measured material
– the readings
 
Each instrument is individually calibrated for highest accuracy
 
41 mm Ø scale
 
Tension meter rugged aluminium housing
 
Certificate of Compliance with the order 2.1 according EN 10204
 
Optionally available: Inspection Certificate 3.1 according EN 10204 with calibration report

Available Models

Model Tension Range Measuring Head Width* X Measuring Head Width Y SCHMIDT Calibration Material**
DXP-50 10 – 50 cN 27 mm 44 mm PA: 0.12 mm Ø
DXP-120 20 – 120 cN cN 27 mm 44 mm PA: 0.12 mm Ø
DXP-200 20 – 200 27 mm 44 mm PA: 0.12 mm Ø
Other tension ranges available on request.
Other units of measure available, such as g.
*  Width of bracket assembly
** Suitable for 95 % of applications – PA = Polyamide Monofilament