cam-bien-do-luc-cang-fsl-1000-422-fsl-500-422-fsl-200-422-fsl-100-422.png
Tension Sensor FSL-422
  • 5 Tension ranges available:
    from 0 - 1000 cN
    up to 0 - 1000 cN
  • Application:
    For sensitive material as optical fibres, technical fibres etc.
  • Field of use:
    For materials with thickness up to approx. Ø 1 mm
  • Feature:
    Smooth running guide rollers with groove Ø 32 mm for minimized material deflection
5 Tension ranges available from 0 - 50 cN up to 0 - 1000 cN

Stationary electronic tension sensors for measuring sensitive materials as optical fibres, carbon fibres, technical fibres etc.

Large, smooth running guide rollers for minimized material deflection with 32 mm groove Ø

Tension sensor with RS 422 output for multi station system and connection to a with PC

 Special Features

Tension sensor FSL-422 with integrated microprocessor controlled measuring amplifier and RS 422 interface for multi station system
 
Large bending radius for gentle handling of sensitive material by using smooth running, V-grooved guide rollers with Ø 29.5 mm, ball-bearing mounted
 
Easy installation, even afterwards, on existing machines
 
2 Mounting possibilities: housing mounting or cylindrical hole mounting (mounting cut out: longhole R 19 mm, length 54 mm)
 
Easy calibration to customized material by operator – zero and gain calibration is required
 
Measuring principle – loadcell with high quality strain gauge bridge
 
Tension sensor with mechanical overload protection

Standard Features

Control lamp shows operative mode availability
 
Tension sensor FSL-422 with aluminium housing
 
CAT 5 cables are used for data transfer
 
Required power supply +15…24 V DC (regulated)
 
Certificate of Compliance with the order 2.1 according EN 10204 is included
 
Optionally available: Inspection Certificate 3.1 according EN 10204 with calibration report

Special features of the RS 422 interface:

  • Up to 32 sensors with different tension ranges and designs may be connected in one line (data transfer max. 200 readings/sec.)
  • Connection to RS 232 using a converter (RS 422 – RS 232).
  • The RS 422 signal can be used for a single sensor over a distance of 1000 m.
  • Each sensor can individually be addressed and set up
  • Can be connected to PLC controls with digital input
  • Simple connection to BUS-Systems using gateways

 

Available Models

Model Tension Range Measuring Head Width* SCHMIDT Calibration Material**
FSL-50-422 0 – 50 cN 150 mm PA: 0.12 mm Ø
FSL-100-422 0 – 100 cN 150 mm PA: 0.12 mm Ø
FSL-200-422 0 – 200 cN 150 mm PA: 0.12 mm Ø
FSL-500-422 0 – 500 cN 150 mm PA: 0.20 mm Ø
FSL-1000-422 0 – 1000 cN 150 mm PA: 0.30 mm Ø
Other tension ranges and measuring head widths available on request.
Other measuring units available, such as g.
* Outer dimensions of front plate
** Suitable for 95 % of applications PA = Polyamide Monofilament