dong-ho-do-luc-cang-q.png

Đồng hồ đo lực căng Q

Xuất sứ: Germany

Nhà cung cấp: HansSchmidt-Song Thanh Cong

Hãng sản xuất: Hans-Schmidt

Liên hệ tư vấn

support

pricing@stc-vietnam.com

0915159944

tam_stc

9 Tension ranges available from 2 - 10 cN up to 50 - 1000 cN

Stationary mechanical tension meter for measuring tensions of fibres, threads and thin wires

Measuring device with large, easy to read scale

Movement with magnetic damping for easy reading when tensions fluctuate

 

Special Features

The analog display shows changing and fluctuating tensions fast and enables an optimal process adjustment
 
Easy online mounting with screws (M6), sidewise or back side 
 
Movement with magnetic damping
 
Tension meter Q with large, easy to read scale Ø 54 mm

Note: Series Q do not include a filament guide and material thickness compensator

Standard Features

Everything in operator’s view:
– the guide rollers
– the measured material
– the readings
 
Ball-bearing mounted, V-grooved guide rollers
 
Each instrument is individually calibrated for highest accuracy
 
Tension meter with rugged shell cast aluminium housing
 
Certificate of Compliance with the order 2.1 according EN 10204 is include
 
Optionally available: Inspection Certificate 3.1 according EN 10204 with calibration report

Available Models

Model Tension Ranges Measuring Head Width* SCHMIDT Calibration Material**
Q-10 2 – 10 cN 65 mm PA: 0.12 mm Ø
Q-20 2 – 20 cN 65 mm PA: 0.12 mm Ø
Q-30 3 – 30 cN 65 mm PA: 0.12 mm Ø
Q-50 5 – 50 cN 65 mm PA: 0.12 mm Ø
Q-100 10 – 100 cN 65 mm PA: 0.12 mm Ø
Q-200 20 – 200 cN 65 mm PA: 0.12 mm Ø
Q-300 20 – 300 cN 65 mm PA: 0.20 mm Ø
Q-500 50 – 500 cN 85 mm PA: 0.20 mm Ø
Q-1000 50 – 1000 cN 85 mm PA: 0.30 mm Ø
Other tension ranges, measuring head widths available on request.
Other units of measure available – g.
* Outer distance between outside guide rollers.
** Suitable for 95 % of applications – PA = Polyamide Monofilament

Calibration to customized material:
If process material differs significantly from the SCHMIDT calibration material in diameter, rigidity or shape, special calibration using customer supplied samples is recommended. For this purpose a material sample of about 5 m should be supplied.