Cảm Biến Đo Lực Căng TSR-200N, TSR-100N, TSR-50N, TSR-20N
Xuất sứ: Germany
Nhà cung cấp: HansSchmidt-Song Thanh Cong
Hãng sản xuất: Hans-Schmidt
0915159944
Tension Sensor TSR
- 5 tension ranges available:
from 0 - 10 N
up to 0 - 200 N - Application:
Wire, cable rope manufacturing, as well as textile industry - Field of use:
- Flexible materials as wires, thin ropes, cables, optical fibres, buffer tubes up to max. Ø 10 mm - Linear, flat material up to max. 10 mm width - Feature:
- Single roller sensor for installation at an existing deflection pulley
- Accuracy 1% FS
5 Tension ranges available from 0 - 10 N up to 0 - 200 N
Online tension sensor for flexible material, as wires, thin ropes and cable up to 10 mm Ø, as well as linear materials up to 10 mm width
Large, hardened guide rollers for minimized material deflection with 29.5 mm or 70 mm groove Ø
Stationary electronic tension sensor, single roller system, for mounting at an existing deflection pully
Special Features
Tension sensor TSR with integrated measuring amplifier and high accuracy 1 % FS
Sensor for installation at an existing deflection pulley; the in- and outcoming angle β has to be 20° or more
Ball-bearing mounted steel or aluminium guide rollers 29.5 mm and 70 mm groove Ø,
– V-grooved (for material with max. 5 mm Ø)
– U-grooved (for material with 3 up to 5 mm Ø)
– tape grooved (for material with max. width of 10 mm)
– V-grooved (for material with max. 5 mm Ø)
– U-grooved (for material with 3 up to 5 mm Ø)
– tape grooved (for material with max. width of 10 mm)
Easy mounting of customer provided rollers – please contact us!
Various output signals are avialbe
– analog: 0 – 1 V (standard), 0 – 10 V (optional)
– digital: RS 232 (optional)
– current: 4 – 20 mA (optional)
– analog DMS: mV/V (optional)
– analog: 0 – 1 V (standard), 0 – 10 V (optional)
– digital: RS 232 (optional)
– current: 4 – 20 mA (optional)
– analog DMS: mV/V (optional)
Easy installation, even afterwards, on existing machines
Easy calibration to customized material by operator – zero and gain calibration is required
Measuring principle – loadcell with hight quality strain gauge bridge
Tension sensor with mechanical overload protection
Tension sensor with rugged aluminium housing
Required power supply +15…24 V DC (regulated)
Certificate of Compliance with the order 2.1 according EN 10204 is included
Optionally available: Inspection Certificate 3.1 according EN 10204 with calibration report
| Model | Nominal Load |
| TSR-10N | 0 – 10 N |
| TSR-20N | 0 – 20 N |
| TSR-50N | 0 – 50 N |
| TSR-100N | 0 – 100 N |
| TSR-200N | 0 – 200 N |
