Đồng Hồ Đo Lực Căng
Xuất sứ: Germany
Nhà cung cấp: HansSchmidt-Song Thanh Cong
Hãng sản xuất: Hans-Schmidt
0915159944
4 Tension ranges available from 10 - 100 daN up to 40 - 400 daN
Rugged mechanical tension meter for measuring pretensioned ropes up to Ø 4 mm
Hand-held unit for tension ranges up to max. 400 daN
Tension meter with large, easy to read scale
Tension meter DNW can be used only for pretensioned, non-moving ropes
Calibration is done using a closed force system
Due to the material path the max. error is approx. 3 % FS (full scale)
Special lever reduces the force to extend outer rollers to capture the material to be measured
Tension meter with large, easy to read scale (54 mm Ø)
Linearized scale provides a better reading
Tension meter with shock-resistant movement
Special guides on the bracket assembly and roller shifting mechanism ensure easy acquisition of the running material
Everything in operator’s view:
– the guide rollers
– the measured material
– the readings
– the guide rollers
– the measured material
– the readings
Ball-bearing mounted, V-grooved guide rollers
Each instrument is individually calibrated for highest accuracy
Special calibration is available
Tension Meter with rugged aluminium housing
Certificate of Compliance with the order 2.1 according EN 10204 is included
Optionally available: Inspection Certificate 3.1 according EN 10204 with calibration report
| Model | Measuring Range | Measuring Head Width* | SCHMIDT Calibration Material** |
| DNW-100K | 10 – 100 daN | 265 mm | steel rope 2 mm Ø |
| DNW-200K | 20 – 200 daN | 265 mm | steel rope 2 mm Ø |
| DNW-300K | 30 – 300 daN | 265 mm | steel rope 3 mm Ø |
| DNW-400K | 40 – 400 daN | 265 mm | steel rope 4 mm Ø |
* Outer distance between outside guide rollers
** SCHMIDT calibration material twisted steel rope
** SCHMIDT calibration material twisted steel rope
Calibration to customized material:
If process material differs significantly from the SCHMIDT calibration material in diameter, rigidity or shape, special calibration using customer supplied samples is recommended. For this purpose a material sample of about 5 m should be supplied.
