Đồng Hồ Đo Lực Căng DXE-50, DXE-120, DXE-200, DXE-400, DXE-1000, DXE-2000
Xuất sứ: Germany
Nhà cung cấp: HansSchmidt-Song Thanh Cong
Hãng sản xuất: Hans-Schmidt
0915159944
Tension Meter DXE
- 6 Tension ranges available:
from 10 - 50 cN
up to 200 - 2000 cN - Application:
basically in textile industry - V-grooved guide rollers groove Ø 7.4 mm
6 Tension ranges available from 10 - 50 cN up to 200 - 2000 cN
Special mechanical tension meter with small measuring head, where access space is limited or where filaments run close together
Hand-held unit mostly used in textil industry or in wire industry for thin wires
Tension meter with turned-up outer finger edges for easy thread
Special Features
The analog display of tension meter DXE shows changing and fluctuating tensions fast and enables an optimal process adjustment
Turned-up outer finger edges guide the running filament into the roller grooves
Movable outer guide rollers
Built-in mounting holes permit fixed installation for continuous tension measurement
Special finger support located on the rear side reduces the effort to move the outer roller assembly
Everything in operator’s view:
– the guide rollers
– the measured material
– the readings
– the guide rollers
– the measured material
– the readings
Small, ball-bearing mounted, V-grooved guide rollers
Each instrument is individually calibrated for highest accuracy
41 mm Ø scale
Tension meter with rugged aluminium housing
Certificate of Compliance with the order 2.1 according EN 10204 is included
Optionally available: Inspection Certificate 3.1 according EN 10204 with calibration report
| Model | Measuring Range | Measuring Head Width* X | Measuring Head Length Y | SCHMIDT Calibration Material** |
| DXE-50 | 10 – 50 cN | 38 mm | 47 mm | PA: 0.12 mm Ø |
| DXE-120 | 20 – 120 cN | 38 mm | 47 mm | PA: 0.12 mm Ø |
| DXE-200 | 20 – 200 cN | 38 mm | 47 mm | PA: 0.12 mm Ø |
| DXE-400 | 20 – 400 cN | 38 mm | 47 mm | PA: 0.20 mm Ø |
| DXE-1000 | 50 – 1000 cN | 36 mm | 47 mm | PA: 0.30 mm Ø |
| DXE-2000 | 200 – 2000 cN | 36 mm | 47 mm | PA: 0.30 mm Ø |
Other tension ranges available on request.
Other units of measure available, such as g.
* Width of bracket assembly
** Suitable for 95 % of applications – PA = Polyamide Monofilament
Other units of measure available, such as g.
* Width of bracket assembly
** Suitable for 95 % of applications – PA = Polyamide Monofilament
