Đồng Hồ Đo Lực Căng DXT-50, DXT-120, DXT-200, DXT-400, DXT-1000
Xuất sứ: Germany
Nhà cung cấp: HansSchmidt-Song Thanh Cong
Hãng sản xuất: Hans-Schmidt
0915159944
Tension Meter DXT
- 9 Tension ranges available:
from 10 - 50 cN
up to 5 - 20 daN - Application:
for ribbons, textiles, foils and similar flat materials - The cylindrical tape rollers (max. 50 mm wide) pointing away from the operator
9 Tension ranges available from 10 - 50 cN up to 5 - 20 daN
Special purpose mechanical tension meter for measuring all kinds of tapes and bands, such as textile ribbons, films, foils, fiber bunches, etc.
Hand-held unit with cylindrical rollers (width max. 50 mm) pointing away from the operator
The tension meter is equiped with both-sided flanged outside guide rollers for better filament guide
Special Features
The analog display of tension meter DXT shows changing and fluctuating tensions fast and enables an optimal process adjustment
Tape rollers with contact surface from 7 mm up to 50 mm are available
Dual-flanged outer guide rollers with various widths for better filament guide (single-flanged rollers optional, recommendable if the material beeing measured is wider than the tape roller)
Roller shifting mechanism ensure easy acquisition of the running material
Built-in mounting holes permit fixed installation for online use
Special finger support located on the rear side reduces the effort to move
Calibration to customer supplied material is available
Everything in operator’s view:
– the guide rollers
– the measured material
– the readings
– the guide rollers
– the measured material
– the readings
Tape rollers, ball-bearing mounted
Each instrument is individually calibrated for highest accuracy
41 mm Ø scale
Tension meter with rugged aluminium housing
Certificate of Compliance with the order 2.1 according EN 10204 is included
Optionally available: Inspection Certificate 3.1 according EN 10204 with calibration report
| Model | Tension Range* | Measuring Head Width** | Roller Width |
| DXT-50 | 10 – 50 cN | 57 mm | 7 mm |
| DXT-120 | 20 – 120 cN | 57 mm | 7, 10, 15, 20, 30 mm |
| DXT-200 | 20 – 200 cN | 57 mm | 7, 10, 15, 20, 30 mm |
| DXT-400 | 20 – 400 cN | 57 mm | 7, 10, 15, 20, 30 mm |
| DXT-1000 | 100 – 1000 cN | 57 mm | 7, 10, 15, 20, 30, 36, 41, 50 mm |
| DXT-2000 | 200 – 2000 cN | 117 mm | 7, 10, 15, 20, 30, 36, 41, 50 mm |
| DXT-5000 | 400 – 5000 cN | 117 mm | 7, 10, 15, 20, 30, 36, 41, 50 mm |
| DXT-10K | 2.5 – 10 daN | 117 mm | 7, 10, 15, 20, 30 mm |
| DXT-20K-L | 5 – 20 daN | 117 mm | 7, 10, 15, 20 mm |
Other tension ranges, measuring head widths and material path calibrations available on request.
Other units of measure available – g or kg.
* SCHMIDT calibration horizontal lying; material textile ribbon or film, depending on tension range and roller width
** Outer distance between outside guide rollers
Other units of measure available – g or kg.
* SCHMIDT calibration horizontal lying; material textile ribbon or film, depending on tension range and roller width
** Outer distance between outside guide rollers
