Cảm Biến Đo Lực Căng FSB1-20K-422, FSB1-10K-422, FSB1-5000-422, FSB1-2000-422
Xuất sứ: Germany
Nhà cung cấp: HansSchmidt-Song Thanh Cong
Hãng sản xuất: Hans-Schmidt
0915159944
Tension Sensor FSB1-422
- 8 Tension ranges available:
from 0 - 100 cN
up to 0 - 20 daN - Application:
For ribbons, filaments, foils and similar flat materials - Field of use:
Max. width of material 30 mm - Feature:
Zylindrical tape rollers are mounted on one side
8 Tension ranges available from 0 - 100 cN up to 0 - 20 daN
Stationary electronic tension sensor for measuring low tensions of textile ribbons, films, foils, fibre bunches etc.
Cylindrical tape rollers with up to max. 30 mm width, one-sided mounting
Tension sensor with RS 422 output for multi station system and connection to a with PC
Special Features
Tension sensor FS1-422 with integrated microprocessor controlled measuring amplifier and RS 422 interface for multi station system
Various roller widths from 7 mm up to 30 mm according to the application are available. The roller width must correspond with the width of the material to be measured
Easy installation, even afterwards, on existing machines
2 Mountuing possibilities: housing mounting or cylindrical hole mounting (mounting cut out: longhole R 19 mm, length 54 mm)
Easy calibration to customized material by operator – zero and gain calibration is required
Measuring principle – loadcel ith high quality strain gauge bridge
Tension sensor with mechanical overload protection
Tape rollers, ball-bearing mounted
Control lamp shows operative mode availability
Tension sensor FSB1-422 with aluminium housing
CAT 5 Kabel werden zur Signalübertragung benutzt
Required power supply +15…24 V DC (regulated)
Certificate of Compliance with the order 2.1 according EN 10204 is included
Optionally available: Inspection Certificate 3.1 according EN 10204 with calibration report
Special features of the RS 422 interface:
- Up to 32 sensors with different tension ranges and designs may be connected in one line (data transfer max. 200 readings/sec.)
- Connection to RS 232 using a converter (RS 422 – RS 232).
- The RS 422 signal can be used for a single sensor over a distance of 1000 m.
- Each sensor can individually be addressed and set up
- Can be connected to PLC controls with digital input
- Simple connection to BUS-Systems using gateways
| Model | Tension Range* | Measuring Head Width** | Roller Width in mm |
| FSB1-100-422 | 0 – 100 cN | 60 mm | 7, 10, 15, 20 |
| FSB1-200-422 | 0 – 200 cN | 60 mm | 7, 10, 15, 20 |
| FSB1-500-422 | 0 – 500 cN | 60 mm | 7, 10, 15, 20 |
| FSB1-1000-422 | 0 – 1000 cN | 60 mm | 7, 10, 15, 20, 30 |
| FSB1-2000-422 | 0 – 2000 cN | 120 mm | 7, 10, 15, 20, 30 |
| FSB1-5000-422 | 0 – 5000 cN | 120 mm | 7, 10, 15, 20, 30 |
| FSB1-10K-422 | 0 – 10 daN | 120 mm | 7, 10, 15, 20 |
| FSB1-20K-422 | 0 – 20 daN | 220 mm | 7, 10, 15, 20 |
Other tension ranges available on request.
Other measuring units available, such as g or kg
* SCHMIDT calibration material depending on tension range and roller width
** Outside dimensions of front plate
Other measuring units available, such as g or kg
* SCHMIDT calibration material depending on tension range and roller width
** Outside dimensions of front plate
