Cảm Biến Đo Lực Căng
Xuất sứ: Germany
Nhà cung cấp: HansSchmidt-Song Thanh Cong
Hãng sản xuất: Hans-Schmidt
0915159944
Tension Sensor MAZF and MBZF
- 3 Tension ranges available:
from 0 - 100 cN
up to 0 - 500 cN - Application:
Tensions of threads, fibres and very thin wires - Field of use:
For fibres up to 500 tex and wire up to approx. 0.2 mm - Features:
- Small, compact design
- Small guide roller groove Ø 7.4 mm
- 2 Different material processes
3 Tension ranges available from 0 - 100 cN up to 0 - 500 cN
Online tension sensor for measuring small tensions of threads and fibres up to 500 tex, as well as very thin wires up to 0.2 mm Ø
Compact sensor with two different designs for continuous tension measuring of tensions in textile and fine wire with small guide roller with groove Ø 7.4 mm
Tension meter can be fixed on a mounting rail DIN EN 60715
Special Features MAZF
Tension sensor MAZF with integrated measuring amplifier and high accuracy of 2 % FS
gently material path, it is guide over the rollers
Material incoming / outgoing angle 35° min
Various output signals
– analog: 0 – 1 V DC (standard), 0 – 10 V DC (optional)
– analog DMS: mV/V (optional)
– analog: 0 – 1 V DC (standard), 0 – 10 V DC (optional)
– analog DMS: mV/V (optional)
Universal mounting possibility – easy to install, even afterwards, on existing machines:
The sensor can be mounted using the three threads at the underside of the housing body. Alternativ it can be fixed on a optional rail DIN EN 60715. A mounting adapter is necessary.
The sensor can be mounted using the three threads at the underside of the housing body. Alternativ it can be fixed on a optional rail DIN EN 60715. A mounting adapter is necessary.
Easy calibration to customized material by operator – zero and gain calibration is required
Measuring principle – loadcell with high quality strain gauge bridge
Standarf Features
Supplied with a 2 m shield cable with open Ends (other cable length on request)
Tension sensor with aluminium housing
Certificate of Compliance with the order 2.1 according EN 10204 is included
Optionally available: Inspection Certificate 3.1 according EN 10204 with calibration report
Tension sensor MBZF with integrated measuring amplifier and high accuracy of 2 % FS
Typical material path – warping the 3 rollers
Various output signals
– analog: 0 – 1 V DC (standard), 0 – 10 V DC (optional)
– analog DMS: mV/V (optional)
– analog: 0 – 1 V DC (standard), 0 – 10 V DC (optional)
– analog DMS: mV/V (optional)
Universal mounting possibility – easy to install, even afterwards, on existing machines:
The sensor can be mounted using the three threads at the underside of the housing body. Alternativ it can be fixed on a optional rail DIN EN 60715. A mounting adapter is necessary.
The sensor can be mounted using the three threads at the underside of the housing body. Alternativ it can be fixed on a optional rail DIN EN 60715. A mounting adapter is necessary.
Easy calibration to customized material by operator – zero and gain calibration is required
Measuring principle – loadcell with high quality strain gauge bridge
| Model | Model | Tension Range | Measuring Head Width* | Schmidt Calibration Material** |
| MAZF-100 | MBZF-100 | 0 – 100 cN | 70 mm | PA: 0.12 mm Ø |
| MAZF-200 | MBZF-200 | 0 – 200 cN | 70 mm | PA: 0.12 mm Ø |
| MAZF-500 | MBZF-500 | 0 – 500 cN | 70 mm | PA: 0.20 mm Ø |
Other measuring units available, such as g.
* Outer dimensions of the housing
** Suitable for 95 % of applications PA = Polyamide Monofilament
* Outer dimensions of the housing
** Suitable for 95 % of applications PA = Polyamide Monofilament
